Restores the power, response and smoothness of your engine!
THE BENEFITS OF CORRECT CARBURETTOR BALANCE
With use, the chain of cables, rods and linkages that connect the throttle to the carburettors will stretch and change their tolerances which results in the carburettor sliders or butterflies operating at slightly different times from one another. This produces an imbalance in the carburation of the engine due to unequal amounts of air entering the cylinders at any given time. carburettor balance, or synchronisation, is essential for the efficient running and longevity of your engine. Any imbalance in the timing, or amount of throttle opening amongst the carburettors on your engine will result in reduced performance, poor throttle response, excessive fuel consumption, increased vibration and increased stress on the crankshaft and bearings.
REGULAR BALANCING OF YOUR CARBS WITH THE TWINMAX WILL ENSURE YOUR ENGINE PERFORMS AT ITS BEST AT ALL TIMES.
* Use with virtually any machine
THE ADVANTAGES OF THE TWINMAX BALANCER
Other balancers use either digital gauges or tubes containing mercury or
spring loaded weights with one gauge per cylinder and any adjustments to the
carburettors are made according to the readings on each of these gauges.
This means that not only is there the potential for errors due to the moving
parts of each gauge, it is very difficult to ensure that each gauge gives
exactly the same reading on a given amount of vacuum, due to the variances in
manufacturing tolerances, friction differences, volumes of mercury or tension of
Synchronising carburettors with the TWINMAX is simple,
Carburettor balance, or the synchronisation, is essential for the efficiency and longevity of your engine. Any imbalance in the timing, or the amount of throttle opening amongst the carburettors on your engine will result in reduced performance, poor response, excessive fuel consumption, increased vibration and increased stress on the crankshaft and bearings. With the TWINMAX, all these problems can be eliminated resulting in a responsive and smooth motor.
USING THE TWIN MAX
Carburettor synchronisation is easy to achieve provided you can use a small
spanner, a screwdriver and a pair of pliers! The theory is simple - each
carburettor has either a sliding value (known as a slider) or a twisting value
(known as a butterfly valve). When the throttle is used a combination of
cables and rods (depending on the machine) are activated, opening and closing
the valves in the carburettors and regulating the volume of petrol/air mixture
allowed into the engine. If these valves do not begin to open at exactly
the same time and by precisely the same amounts, the motor will be unbalanced or
unsynchronised. This causes vibration, poor fuel consumption, poor
throttle response, reduced performance and can stress crankshafts and bearings.